Electronics mega deals collection
Home > Raspberry Pi & Orange Pi > ₹3,917.59 X870 NVME M.2 2280/2260/2242/2230 SATA SSD NAS Expansion Board with USB 3.0 Jumper for Raspberry Pi / Rock64 Arduino Compatible SCM & DIY Kits from Electronics on banggood.com

₹3,917.59 X870 NVME M.2 2280/2260/2242/2230 SATA SSD NAS Expansion Board with USB 3.0 Jumper for Raspberry Pi / Rock64 Arduino Compatible SCM & DIY Kits from Electronics on banggood.com

Product #: 196977
Stock:
In Stock
Store:
Banggood.com
 
Reviews:
Free Shipping to India

Compatibility

To confirm that this part fits your vehicle, please enter your vehicle's details below.
  • Year:
    Select
    • Make:
      Select
      • Model:
        Select
        • Submodel:
          Select
          • Trim:
            Select
            • Engine:
              Select
              • Clear All
              This part is compatible with 0 vehicle(s). Show all compatible vehicles
              This part is compatible with 1 vehicle(s) matching
              This part is not compatible with
              Recent searches
                • Year
                • Make
                • Model
                • Submodel
                • Trim
                • Engine
                  Overview:

                  This is the X870 NVMe M.2 SSD Storage Expansion Board, it provides a complete storage solution for raspberry pi or ROCK64. It supports multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230.

                  Features:

                  - Ideal storage solution for Raspberry Pi - M.2 NVMe SSD Shield
                  - Supports up to 2TB M.2 NVMe SSD solid-state drives
                  - Supports multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230
                  - Supports operating system installation and booting from your SSD
                  - Supports fastest OS image writing (>1Gb/S*) from a PC or a Mac
                  - Integrated USB 3.1 Gen2 to PCIe Gen3x2 10Gb/s bridge controller
                  - USB2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
                  - Quick file transfer with high-speed USB3.1 Gen1 5Gb/s or Gen2 10Gb/s connectivity from a PC or a Mac
                  - LED blue indicator indicates drive status
                  - On-board micro-USB socket and XH2.5 connector allows external power supply to power high capacity SSD (Max 11.5Watts)
                  - USB bus-powered
                  - Specially-made short USB Type-C to USB-A 3.0 cable to connect with Raspberry Pi
                  - Fully compatible with X720, X730 and X735 for intelligent and safe power management
                  - PCB Size: 87mm x 56mm


                  Note:

                  - *The Raspberry Pi main board is not included.
                  - *Test condition: USB3.1 Gen 2 port, SSD sequential write speed >1000MB/s
                  - NVMe SATA SSD is not included
                  - Compatible with NVMe M.2 SSDs
                  - Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
                  - As with all SSDs, new media must be formatted before use
                  - Performance depends on host system, workload, and SSD media used
                  - SSDs use exceptionally high performance storage media that will run hot when under load
                  - Older SSD drives with less efficient flash media may not perform as well as newer drives


                  Power supply request:

                  5Vdc +/-5% , Powered by Raspberry Pi
                  Additional power supply for SSD (Only when you find that the power supply of the SSD is insufficient)
                  5Vdc via on-board micro-USB or XH2.5 2Pin connector


                  Ports & Connectors:

                  - USB socket - USB Type-C x 1
                  - Micro-USB SSD power socket x 1
                  - XH2.54 2P SSD power input port x 1
                  - 67Pin M.2 connector P=0.5mm, H3.2mm, Key B x 1

                  Click for more info


                  Package included:

                  1 x X870 Board
                  1 x USB3.0 Type A to Type C cable(length: 10cm)
                  1 x Screws Pack
                  1 x Screwdriver









                  Similar Products